Free tool
Roofing square calculator
Enter length and width to see roof area, squares and bundles.
Assumes a simple roof over a rectangular footprint. Pitch factor for 6/12: 1.118. Always verify on site.
Turn this into an estimateHow roofing squares are calculated
A roofing square is 100 square feet of roof surface. Because a sloped roof is larger than the floor area below it, the footprint (including the overhangs) is multiplied by a pitch factor:
pitch factor = √(1 + (rise ÷ 12)²)
- Footprint = (length + 2 × overhang) × (width + 2 × overhang)
- Roof area = footprint × pitch factor
- Squares = roof area × (1 + waste %) ÷ 100
- Bundles = squares × 3 (for most asphalt shingles), rounded up
Pitch factors
| Pitch | 3/12 | 4/12 | 5/12 | 6/12 | 7/12 | 8/12 | 9/12 | 10/12 | 12/12 |
|---|---|---|---|---|---|---|---|---|---|
| Factor | 1.031 | 1.054 | 1.083 | 1.118 | 1.158 | 1.202 | 1.250 | 1.302 | 1.414 |
Which waste factor?
Simple gable roofs usually need about 10% extra for cuts and starter courses. Hips, valleys, dormers and skylights mean more cutting, so 15% or more is common. Check the shingle manufacturer's coverage per bundle: most architectural shingles cover one square with three bundles, some heavier products need four.
Limits of a quick calculation
This calculator assumes one pitch over a rectangular footprint. For complex roofs, measure each plane separately or use aerial measurement reports, and always confirm on site before ordering material.
Create your roofing estimate now
Free, no signup. Roof calculator, common line items and a clean PDF in minutes.
Open the estimate maker